[Coladam] Latest update on the display/printer saga

geoffrey oltmans oltmansg at bellsouth.net
Wed Dec 22 22:45:54 CET 2010


Does it spin the daisy wheel when it reaches home?

Normal sequence should be:

Move head to home position
spin daisy wheel to home position
advance roller
move print head to left margin






________________________________
From: Justin Salvato <justin76here at hotmail.com>
To: coladam at adamcon.org
Sent: Wed, December 22, 2010 3:38:45 PM
Subject: Re: [Coladam] Latest update on the display/printer saga

When I pull the reset on the non-printing SmartWriter, it returns to the home 
position but does not advance the roller.


From: geoffrey oltmans 
Sent: Wednesday, December 22, 2010 4:30 PM
To: Justin Salvato ; coladam at adamcon.org 
Subject: Re: [Coladam] Latest update on the display/printer saga

If memory serves (and maybe someone can validate). There is a way to put the 
printer into self test mode while shorting out a pin on the circuit board while 
powering it up. It'll print every character on the print wheel over and over 
when you do. Can't remember where exactly you do that.

When you pull the system reset, does the print head return to the home position 
and advance the roller?



--------------------------------------------------------------------------------
From: Justin Salvato <justin76here at hotmail.com>
To: coladam at adamcon.org
Sent: Wed, December 22, 2010 3:31:32 PM
Subject: [Coladam] Latest update on the display/printer saga

I opened up the first printer, the one giving me display problems, but could 
print.  I took some compressed air to it.  Made some observations: 1) some 
screws were missing 2) the wires & components are slightly different than the 
2nd printer.  3) a shield that was blocking the daisy wheel/print mechanism  in 
the 2nd printer, was not present in this one.

Well, ever since I put it back together, does display hasn’t screwed up on me. A 
Christmas miracle perhaps?  I dunno.  


However, my second ADAM is pretty much useless, but if I ever get around to 
learning electronics, I’d like to repair it.

Justin
_______________________________________________
Coladam mailing list
Coladam at adamcon.org
http://adamcon.org/cgi-bin/mailman/listinfo/coladam
_______________________________________________
Coladam mailing list
Coladam at adamcon.org
http://adamcon.org/cgi-bin/mailman/listinfo/coladam


More information about the Coladam mailing list