[Coladam] ADAMOUSE II POST ON NIAD

Geoff Oltmans oltmansg at bellsouth.net
Sun Mar 4 19:05:14 CET 2012


The 1351 (or was it 1352?) mouse had two modes of operation... One as a standard mouse and another for joystick emulation.

I believe in either case though it was digital.

Sent from my iPhone

On Mar 3, 2012, at 5:20 PM, Dale Wick <dmwick at yahoo.com> wrote:

> Well, the C64 joystick port had an analog in or maybe even dual analog in for position sensing.  The Coleco joystick port has an interrupt driven digital encoder (pulse digital input for moving a tick and direction digital input).  So they are not directly compatible for sure.  And each Coleco port has only 1 dimension available.  I think the C64 had x and y analog in on each joystick connector.
> 
> Dale
> 
> From: Jim Notini <jnoti2 at comcast.net>
> To: Geoff Oltmans <oltmansg at bellsouth.net> 
> Cc: Dale Wick <dmwick at yahoo.com>; kevin laskowski <klasko54 at gmail.com>; Coleco help desk <coladam at adamcon.org> 
> Sent: Saturday, March 3, 2012 12:28:18 AM
> Subject: Re: [Coladam] ADAMOUSE II POST ON NIAD
> 
> The ADAMouse I & II by Thomas Mackie were actually a modded C=64 mouse if I recall correctly. There were two versions of the ADAMouse I:
> 
> - Internal modification needed to Joystick Port #1 required most likely to provide additional power for the mouse
> - No modification required but a separate power adapter was provided
> 
> there were limitations to the software that would work with both incarnations.
> 
> The ADAMouse II solved some of the problems and compatibilities of ADAMouse I and simply plugged into Port #1.
> 
> Again, this is all from fading memory and I would need to verify the above by rereading the NIAD issues were they were discussed.
> 
> 
> ----- Original Message ----- From: "Geoff Oltmans" <oltmansg at bellsouth.net>
> To: "Jim Notini" <jnoti2 at comcast.net>
> Cc: "Dale Wick" <dmwick at yahoo.com>; "kevin laskowski" <klasko54 at gmail.com>; "Coleco help desk" <coladam at adamcon.org>
> Sent: Friday, March 02, 2012 6:18 PM
> Subject: Re: [Coladam] ADAMOUSE II POST ON NIAD
> 
> 
> Anyone have pictures of this mythical beast?
> 
> Sent from my iPhone
> 
> On Mar 2, 2012, at 6:08 PM, "Jim Notini" <jnoti2 at comcast.net> wrote:
> 
> > Again, this will be a very hard item to find and those that might have one
> > will probably not part with it.
> > 
> > If you are just interested to see what a mouse would feel like when used on
> > an ADAM, you can always hook-up a Roller Controller (trakball) to the ADAM
> > with the switch set on the Roller Controller to the "Joystick" setting. Any
> > ADAM software, such as SmartWRITER or PowerPAINT, that accepts controller
> > input will work with it.
> > 
> > ----- Original Message ----- From: "Dale Wick" <dmwick at yahoo.com>
> > To: "kevin laskowski" <klasko54 at gmail.com>; "Coleco help desk"
> > <coladam at adamcon.org>
> > Sent: Friday, March 02, 2012 2:35 PM
> > Subject: Re: [Coladam] ADAMOUSE II POST ON NIAD
> > 
> > 
> > I was offered one at some point, but I don't think I was able to accept it.
> > But if I spot it the next time I go through my gear, I'll let you know.
> > 
> > Dale
> > 
> > 
> > ________________________________
> > From: kevin laskowski <klasko54 at gmail.com>
> > To: Coleco help desk <coladam at adamcon.org>
> > Sent: Tuesday, February 28, 2012 8:53:53 PM
> > Subject: [Coladam] ADAMOUSE II POST ON NIAD
> > 
> > Hello. Does anyone have a ADAMOUSE II? Thanks Kevin.
> > _______________________________________________
> > Coladam mailing list
> > Coladam at adamcon.org
> > http://adamcon.org/cgi-bin/mailman/listinfo/coladam
> > _______________________________________________
> > Coladam mailing list
> > Coladam at adamcon.org
> > http://adamcon.org/cgi-bin/mailman/listinfo/coladam
> > 
> > 
> > _______________________________________________
> > Coladam mailing list
> > Coladam at adamcon.org
> > http://adamcon.org/cgi-bin/mailman/listinfo/coladam
> 
> 
> 
> 


More information about the Coladam mailing list