[Coladam] RCA v. coax v. ADAM

Kevin Powers kjpmail at gmail.com
Thu Aug 2 17:26:33 CEST 2012

Does anyone make those cables for the 7-pin DIN connector to composite
video & sound?  I don't know jack squat about putting wires together.

On Thu, Aug 2, 2012 at 11:23 AM, John Turner <gimechip at live.com> wrote:

>  If your Adam is expansion module 3 which converts a colecovision into an
> adam, then it only offers RF output to channel 3 or 4 via the colecovision,
> but you can add a composite (or other) video mod. If it is the stand alone
> adam system then it has both the rf output and a single composite video
> output (without audio). There is also a 7-pin DIN connector that has both
> video and audio on it and you can wire up a cable to get composite video
> and sound from this connector.
> > Date: Thu, 2 Aug 2012 11:13:04 -0400
> > From: kjpmail at gmail.com
> > To: coladam at adamcon.org
> > Subject: [Coladam] RCA v. coax v. ADAM
> >
> > What are the connections from the ADAM to the TV/monitor? When I get my
> > ADAM, I would like to connect via RCA cables, i.e., 1 composite RCA
> > connection for the video & 1 or 2 composite connections for the mono
> > audio. But my understanding is that in order to do this, I would need to
> > have a special cable that plugs into a 5-pin port in the back of the
> >
> > Is it possible to plug two RCA cables into the ADAM, plug them into the
> TV,
> > and be done? Or am I going to be stuck using the same coaxial jack that I
> > use to plug a cable box or most video game systems without
> > composite-out into my TV?
> > _______________________________________________
> > Coladam mailing list
> > Coladam at adamcon.org
> > http://adamcon.org/cgi-bin/mailman/listinfo/coladam

More information about the Coladam mailing list